Be careful when trying to take care of your windshield wipers

We’ve all observed a wide range of hand crafted answers for auto glass repair on the wild Web. All things considered, as you probably are aware, not all that you see or perused on the Internet merits attempting, in actuality (recall the “putting your telephone in the microwave will energize it” thing?). We chose to demystify some prominent windshield repair hacks, and disclose to you why they do or don’t work. 
In any case, initial, a little windshield science. 
Its a dependable fact, a simple scratch or chip can rapidly prompt a major split or break, bargaining the wellbeing of your windshield by debilitating your view, as well as by debilitating the glass that should stop the top of your auto from pounding you and your travelers in the event of rollovers. 
Your windshield can hold 1,5 times the heaviness of your whole auto, showing a rigidity (capacity of a material to withstand a pulling power) of around 10,000 psi. A shockingly little split in the glass can debilitate it enormously, putting your security at hazard. 
The sorts of effects and nature of hazard 
Contingent upon how the split or break spreads, the nature of the hazard to your windshield’s trustworthiness and strength changes. A bigger break or hit than those recorded here for the most part prompt full windshield substitution. 
An outline can prove to be useful to assess the hazard: 
Green: This is a minor break, yet there is still hazard. You have some an opportunity to act before it winds up noticeably yellow or red, however don’t hold up too long. 
Yellow: This needs snappy activity. In the event that it spreads, it could wind up noticeably unrepairable. You can dodge high and superfluous cost by acting at this point. 
Red: Emergency! No opportunity to lose with this one, it’s a genuine security risk. On the off chance that it’s repairable, it must be dealt with immediately. 
DIY Windshield Repair Methods Overview 
The most prominent web crawler questions about windshield repair fundamentals predominantly rotate around 4 custom made arrangements : 

  • Nail clean 
  • Bug splash, salt and rubbing liquor arrangement 
  • Superglue 
  • Tape 
  • Nail clean 

As much as nail clean may outwardly take after windshield repair tar, it is not, by any stretch of the imagination, a similar thing. Nail clean doesn’t solidify so much as pitch and won’t stick either. Keep in mind how we discussed the rigidity of your windshield prior? Indeed, legitimately, the material used to repair it ought to hold a similar quality. 
Rigidity is ascertained by two variables: glue quality (capacity to follow, to adhere to the glass) and durable quality (capacity to hold itself together). The glue quality of nail clean midpoints around 21 psi (how about we not overlook the aggregate elasticity of your windshield midpoints 10,000 psi). 
While we don’t have correct numbers about its durable quality close by, we should simply say it’s a genuine issue in the nail clean industry… between the base coat and the top coat. So would it be a good idea for us to consider it for auto glass repair? No. We shouldn’t. 
In addition, similarly as each other natively constructed arrangements recorded above, it can’t be connected with enough weight to fill all the little holes the split appropriately, letting in air bubbles that will additionally debilitate the repair. 
Bug shower arrangement 
An answer of bug shower, salt and rubbing liquor remains totally fluid and won’t solidify, rejecting its handiness as windshield repair material immediately. Truth be told, it leaves a thin salty and sticky splendid white film on the windshield and inside the split, debilitating the driver’s view much more than the break alone. Many individuals attempted it on YouTube, it just doesn’t work. 
Superglue 
In the first place, the superglue strategy obliges somebody to push on the break from inside the auto to “fill the split all the more completely”, putting it at awesome danger of extending. 
On the off chance that the elasticity of superglue differs from 1000 to, how about we be liberal, 5000 psi, making it more grounded than nail clean (stunning, isn’t it?), despite everything it holds not as much as a large portion of the rigidity of your windshield. 
What’s more, since you can’t make a difference it with enough weight, nor would you be able to haul out air and dampness from the chip in the first place, you’ll make certain to seal in air bubbles, making the auto glass repair frail, as well as keeping a further repair, since it’s for all intents and purposes difficult to expel the paste from the break. 
Primary concern: superglue is a restricted ticket to windshield substitution. 
Tape 
Do we truly need to go over this one? 
Despite the fact that tape is obviously impossible for windshield repair, it can incidentally shield a chip from getting loaded with tidy, earth or water before repairing it. We’re not discussing pipe tape here, simply clear and not really sticky tape you can expel effectively. 
So… What now? 
All things considered, most auto protection programs cover 100% of the expenses of an expert windshield repair. In many spots, you get a free guarantee (contingent upon the organization, it can even be a lifetime guarantee) at work, and you complete it legitimately. 
Some windshield repair packs are at a bargain, yet they additionally have their advantages and disadvantages. They’re notable for working marvels on minor scratches, additionally to worsen greater effects and making the employment of the master who will in the long run need to repair it exceptionally troublesome. 
How might a master do it then? 
All things considered, the professional begins by vacuuming the air and dampness out of the split or chip, something that is almost difficult to manage without purchasing more costly apparatuses than those incorporated into an essential repair unit. 
He then applies pitch (with appropriate rigidity, refractive list and adaptability level) with a lot of weight to fill each little piece of the split. He likewise has an UV light to accelerate the drying procedure, permitting the gum to dry consummately set up before evacuating the weight. 
At that point, to even the abundance pitch on the glass, he shaves it level and cleans your windshield clean.

This blog post is inspired by this article written by Julia K.

Electric Razor Guide

The electric razor (also known as the electric dry shaver) has a rotating or oscillating blade. The electric razor itself does not require the use of shaving cream, soap or water, with the razor being powered by a small DC motor. The typical major designs of this evolution in shaving includes the foil variety of electric razor, which uses a fine structure of layered metal bands that partially pulls out the hair follicle before cutting off the extracted length and then allowing the remainder of the hair follicle to retract below the surface of the skin. A recent study in the UK alone has discovered that almost 32% of men shave regularly with an electric razor. Using an electric razor has many great benefits without the major disadvantages that can be associated to shaving with a blade. If properly used, most electric razors can offer the user a shave that is every bit of close as a normal shave but with the absence of cuts and scraping irritation, The electric razor is a quicker, less messy and more convenient way to shave, but however some patience is necessary when starting to use a razor of this type, as the skin usually takes some time to adjust to the way the electric razor lifts and cuts the hair.

Preparation Before Shaving

To begin shaving with an electric razor you must follow the correct preparation in order to achieve the ultimate electric razor shaving experience, we recommend the following to begin:

1. A good facial wash or facial scrub – Either of these products will clean the face and leave the pores open and ready for shaving.

2. A good quality pre shave oil – This can be just normal pre shave oil or specifically formulated electric razor pre shave oil, both will allow the razor to glide effortlessly over the skin and will decrease the chances of painful pulling.

3. An electric razor (obviously)- This can have one of two head designs, either foil or rotary. The rotary cutting system works well on people with lighter facial and beard hair, whilst the foil cutting system is more effective on dense thick facial hair and beards.

4. An electric razor brush – This will allow the cleaning of the electric razor once the shave has commenced and will allow the razor to operate at maximum efficiency

5. A premium quality skin food product – Whilst shaving your facial hair the user will also shave a layer of skin off the face. This will usually contain vital minerals and nutrients that promote healthy skin, a skin food product will replenish these mineral reserves.

6. Finally a skin moisturiser or aftershave milk, both of these will replenish the skins moisture after shaving and will allow it to retain the moisture it produces; this will help the skin heal faster and more effectively after shaving.

Shaving With An Electric Razor

In order to get the most out of your electric razor and to achieve the finest and closest shaving experience you’ve ever had, these are the steps that we recommend:

1. Firstly make sure you purchase the correct electric razor for your facial hair type. As mentioned previously, the rotary head design shaving system works better on lighter and finer facial hair and beards, whilst the foil head operated system is more effective on dense and thick facial hair and beards.

2. Prepare your face properly with a good quality facial scrub or facial wash and dry thoroughly. This will open the pores and clean the skin ready for the shave.

3. Next use a pre-shave oil, let this oil sink deep into the skin and use it generously over the face. This will act as a lubricant between the skin and the electric razor, thus reducing friction. This oil will also help the hair follicles to straighten making them easier to shave and with less risk of pulling.

4. While you are waiting for the pre-shave oil to sink into the skin you should briefly clean your electric razor with the cleaning brush provided. Brush each of the electric razor heads separately and the protective shields on the electric razor as well. Not only will this enable and closer more comfortable shave, but it will also preserve your electric razor for longer.

5. Once shaving has commenced start to shave against the grain of the beard or facial hair. Doing this will help you pull the hair follicle protruding out of the skin and so the electric razor will be able to cut lower down the follicle, thus resulting in a closer shave.

6. The next thing to do will shaving is to go slowly. This may sound like common sense but when shaving with an electric razor it is very easy to get carried away and rush the process. Whilst shaving with an electric razor is faster and neater than shaving with a standard razor blade, it needs time and slow pressure to be completely effective, especially under complex areas like the chin and neck.

7. After the shave has been completed ensure that you apply a light coating of skin food onto the shaved area. This will replenish the vital minerals and protective oils that have been removed from the skin during shaving.

8. Finally, never under estimate the use of a good moisturiser to replenish all the lost moisture in your skin and to regenerate the protective skin layers that shaving removes.

Cleaning Your Electric Razor

The common electric shaver as mentioned above works in essence due to moving or oscillating blades that move back and forth to trim the area of hair that you need trimmed. Due to the very design of the electric razor, this motion creates hair blockages in the razor itself, which decrease the electric razors effectiveness and power. You should clean your electric shaver regularly in order to keep your blades fresh and at optimal efficiency, for good hygiene and sanitation purposes and in order to increase the life span of your electric shaver.

Here it is recommended that you clean your electric razor regularly, preferably after every third or forth shave. With a foil head electric razor you can lift off the head frame, which holds the screen (foil), and then brush out all the hair follicles from the under side with the electric razor cleaning brush that should have been provided with your electric razor. Make sure not to touch the foil screen itself with the cleaning brush as the screen is very fragile and requires great care. Next you can run the under side of the head and foil under water in order to rinse out any remaining hair follicles that brushing alone could not remove. Below this foil screen you will find the electrics razor’s cutters, these are the main components to any electric razor, this is the part of the electric razor that you must take the greatest care to clean and maintain properly. Hair follicles, dirt and general debris can easily build up inside the cutter area of the electric razor and reduce the electric razors effectiveness and power and so take extra care and attention to make sure that this part is properly cleaned.

For rotary head electric razors, the cleaning method differs slightly. Here you must lift of the electric razors head assembly unit and brush out the under side of the three electric razor cutters and the three chambers. Here ensure that you do not tap the electric razor heads on the sink itself to remove any trapped hair follicles as this has a high risk of damaging and altering the shape of the precision made combs. Every month or so you must make sure that you remove each of these individual cutters and combs from the retaining plate, making sure that each cutter and comb are kept in their original ‘set’, as mixing these up would have a detrimental effect on your electric razors performance as they are each designed to compliment each other. After this is done you can brush the hair follicles from the cutters and then soak them in liquid cleaner and lubricant. This will ensure that your electric razor is kept in its peak operating condition and that you will never be disappointed in its performance.

Finally after these cleaning steps have been undertaken you must ensure that you have correctly lubricated your electric razor. Here it is especially important to lubricate the metal surfaces of the screen and cutter. Here just spray a light lubricant on the shaving screen while the electric shaver is running. This will immediately have the effect of freeing up any metal on metal binding which will nick and blunt the surface of your electric razor.

Other Electric Razor Tips

Here are a list of additional tips that we think may help any novice or seasoned electric razor user, these are:

1. Ensure that you completely read the user manual that comes with your electric razor. These are produced for you specifically and will cover all of the basic functions of your safety razor along with some ideal shaving tips.

2. Shave daily. Here you’re skin must adapt to an electric razor if you have switched from a razor blade. The skin will need to get used to and adapt to the way in which an electric razor removes hair follicles. By shaving everyday you ensure that your skin will adapt to this change quicker.

3. As stated in the previous section. Always ensure that you give your electric razor a brief clean after every three to four shaves and then make sure that a detailed clean is committed every month as well.

4. If you frequently suffer from razor bumps, skin burn or general skin irritation, try to consider changing your electric razor to one which ahs a built in lubricating gel dispenser that should help to reduce skin irritation.

5. Applying regular baby or talcum powder to the face before shaving is a neat trick to reduce friction on your face between the skin and the electric razor and thus allows for a smooth shave. This is especially important for those unfortunate sufferers of sensitive skin.